Product introduction
| Product Introduction |
| MCX90° male inner needle to MCX90° male inner needle |
Cable: RG178 / UT-034 / 1.13mm coaxial cable (optional: RG316 / UT-141 / 2.58mm coaxial cable, RG405 high-frequency signal coaxial semi-flexible cable) |
| Insulation: expanded polyethylene (low loss) |
Shielding: High-density tinned copper braid + aluminum foil (excellent shielding effect) |
| Protection: ethylene fluoride or PVC |
| Interface Type: MCX+ Inner Pin |
| Cable length: 5cm~200cm (length can be customized) |
| parameter | |||
| impedance | 50Ω | ||
| Operating frequency | Standard 6GHz (High frequency needs customization) | ||
| attenuation | RG178 @ 3 GHz: ~ 0.42 dB/ft (1.38 dB/m) RG316 @ 3 GHz: ~ 0.32 dB/ft (1.05 dB/m) | ||
| standing wave | 1.5MAX | ||
| Temperature range | -55℃~+200℃ | ||
Cable: PTFE insulated foam wire (e.g. Gore G-FLEX 150) |
Reason: 6~24GHz low loss requirements, outer diameter ≤2mm for easy wiring. |
| 3.4 Military equipment |
| Cable: RG-316 (Mi-Label MIL-DTL-17) |
| Reason: Resistant to extreme temperatures, vibrations, and high shielding requirements. |
Selection guide
| 1. Specifications and characteristics of commonly adapted cables | |||||
| Model | Outside diameter | Central conductor | 3GHz loss | peculiarity | Applicable scenarios |
| RG-174 | 2.8mm | 7*0.16mm | 0.82dB/m | Flexible, easy to install, and low cost | Consumer electronics |
| RG-316 | 2.6mm | 7*0.1mm | 0.84dB/m | High temperature resistance, military industry standards | High temperature environment, test instruments |
| Micro foamed PE wire | 1.5~2.2mm | 0.3~0.5mm | 0.50dB/m | High frequency loss is low | 5G/Wi-Fi |
| Semi-steel wire | 1.0~3.0mm | Solid copper | 0.30dB/m | Relatively stable and good shielding | Test calibration, mmWave front |
| 2. Comparison of key parameters and selection logic | ||||
| 2.1 Electrical performance priority | ||||
| parameter | RG-174 | RG-316 | Foamed PE wire | effect |
| Attenuation @6GHz | 1.8dBm/m | 1.7dBm/m | 0.9dBm/m | High-frequency signal integrity |
| Shielding efficiency | 70dB | 90dB | >90dB | Anti-interference ability |
| Impedance stability | ±3Ω | ±2Ω | ±1Ω | Reflected signal suppression |
| 2.2 Mechanical and environmental adaptability | |||
| parameter | RG-174 | RG-316 | Foamed PE wire |
| Minimum bend radius | 15mm | 25mm | 30mm |
| Temperature range | -40℃~+85℃ | -65℃~+200℃ | -50℃~+85℃ |
| tensile strength | medium | Tall | Low (easily damaged) |
| 3. Typical application scenarios are matched with cables |
| 3.1 Consumer Electronics (Bluetooth/Wi-Fi) |
| Cable: RG-174 |
Reason: Cost sensitive, frequency ≤ 5GHz, short length (<0.3m) and controllable loss. |
| 3.2 Test Instrument Jumper (Vector Network Analyzer) |
Cable: RG-316 or low-loss foam cable (e.g. Times LMR-200) |
| Reason: It needs to be resistant to mating and unplugging, low loss (high calibration accuracy requirements). |
| 3.3 Vehicle radar/5G small cell station |
Cable: PTFE insulated foam wire (e.g. Gore G-FLEX 150) |
Reason: 6~24GHz low loss requirements, outer diameter ≤2mm for easy wiring. |
| 3.4 Military equipment |
| Cable: RG-316 (Mi-Label MIL-DTL-17) |
| Reason: Resistant to extreme temperatures, vibrations, and high shielding requirements. |
| 4. Supplementary instructions |
4.1 Outer diameter mismatch: MCX connectors usually support 1.0~3.0mm wire diameter, and customization is required beyond the range (such as micro wires require a dedicated MCX head). |
4.2 High frequency loss: RG-174 has 2 times higher loss than foamed PE wire at 6GHz, and is avoided for long-distance transmission. |
4.3 Phase stability: For phase-sensitive applications (phased arrays), prefer semi-rigid wires or phase-stabilized cables (e.g., Huber+Suhner S100). |
4.4 Connector Grade: Gold-plated contacts MCX (non-nickel plated) are selected to ensure a > of 500 mating and unmating life. |
Factory Tour
Adhering to the business principle of mutual benefits, we have had a reliable reputation among our customers because of our professional services, quality products and competitive prices.
Knowledge
What international certifications has your company obtained?
How do you ensure product quality?
Do you provide technical support?
What if products are damaged during shipping?
What is your warranty policy?
How to test product quality before bulk orders?
MCX90° male head inner needle to MCX90° male head inner needle
Product Model：
Categories：
Keywords：
Download File：
MOQ:1000pcs
Online Message
Ready to grow your business? Your next great business opportunity starts with an inquiry.
Create the most competitive and outstanding enterprise in the industry and establish a national brand for China's intelligent manufacturing.
Contact Us
> Service Hotline
WhatsApp：
E-mail：
Message：
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Shenzhen Huanxie Technology Co..tld.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地