Product introduction
| Product Introduction |
| IPEX to SMA RF coaxial connection cable waterproof |
| Wire: 1.13mm OD coaxial cable |
| Interface Type: IPEX/SMA |
| Cable length: 5cm~200cm (length can be customized) |
1.13mm OD coaxial cable parameter description
| 1. Core parameters | ||
| parameter | Typical values | standard |
| characteristic impedance | 50Ω or 70Ω | The RF field is mainly 50Ω, and the video field may use 75Ω |
| Outside diameter | 1.13mm | Tolerances are typically ±0.03mm |
| Inner conductor material | Silver-plated copper wire/copper-clad steel | Silver-plated copper provides better electrical conductivity, and copper-clad steel enhances strength |
| Insulation | Expanded polytetrafluoroethylene (PTFE) Or solid PE | Foamed PTFE reduces losses |
| shielding | Single/double braided shielding (tinned copper) | High-frequency applications need to ≥ 95% coverage and have stronger anti-interference capabilities. |
| Sheath material | Ethylene fluoride (FEP) or polyperfluoroethylene propylene (PFA) | High temperature and chemical resistance, wide operating temperature range. |
| Frequency range | DC~40 GHz (up to 60 GHz for premium models) | High-frequency performance depends on insulation uniformity and shielding quality. |
| Attenuation @6GHz | Typical values: • 10 GHz: ≤1.2 dB/m • 40 GHz: ≤4.5 dB/m | The loss of foamed PTFE insulation is significantly lower than that of solid PE. |
| Stop the wave | ≤ 1.3:1 (within all frequency bands) | The interface processing process has a great impact on high-frequency VSWR. |
| Minimum bend radius | ≥5× OD (dynamic) ≥3× OD (static) | Approx. 5.65mm (dynamic) / 3.4mm (static), excessive bending can damage the shield. |
| Operating temperature range | -65°C ~ +200°C (FEP sheath) | Military/aerospace grade up to +260°C (PFA sheath). |
| Selection guide | |||||
| 1. Specifications and characteristics of commonly adapted cables | |||||
| Model | Outside diameter | Central conductor | 3GHz loss | peculiarity | Applicable scenarios |
| RG-174 | 2.8mm | 7*0.16mm | 0.82dB/m | Flexible, easy to install, and low cost | Consumer electronics |
| RG-316 | 2.6mm | 7*0.1mm | 0.84dB/m | High temperature resistance, military industry standards | High temperature environment, test instruments |
| Micro foamed PE wire | 1.5~2.2mm | 0.3~0.5mm | 0.50dB/m | High frequency loss is low | 5G/Wi-Fi |
| Semi-steel wire | 1.0~3.0mm | Solid copper | 0.30dB/m | Relatively stable and good shielding | Test calibration, mmWave front |
| 2. Comparison of key parameters and selection logic | ||||
| 2.1 Electrical performance priority | ||||
| parameter | RG-174 | RG-316 | Foamed PE wire | effect |
| Attenuation @6GHz | 1.8dBm/m | 1.7dBm/m | 0.9dBm/m | High-frequency signal integrity |
| Shielding efficiency | 70dB | 90dB | >90dB | Anti-interference ability |
| Impedance stability | ±3Ω | ±2Ω | ±1Ω | Reflected signal suppression |
| 2.2 Mechanical and environmental adaptability | |||
| parameter | RG-174 | RG-316 | Foamed PE wire |
| Minimum bend radius | 15mm | 25mm | 30mm |
| Temperature range | -40℃~+85℃ | -65℃~+200℃ | -50℃~+85℃ |
| tensile strength | medium | Tall | Low (easily damaged) |
| 3. Typical application scenarios are matched with cables |
| 3.1 Consumer Electronics (Bluetooth/Wi-Fi) |
| Cable: RG-174 |
Reason: Cost sensitive, frequency ≤ 5GHz, short length (<0.3m) and controllable loss. |
| 3.2 Test Instrument Jumper (Vector Network Analyzer) |
Cable: RG-316 or low-loss foam cable (e.g. Times LMR-200) |
| Reason: It needs to be resistant to mating and unplugging, low loss (high calibration accuracy requirements). |
| 3.3 Vehicle radar/5G small cell station |
Cable: PTFE insulated foam wire (e.g. Gore G-FLEX 150) |
Reason: 6~24GHz low loss requirements, outer diameter ≤2mm for easy wiring. |
| 3.4 Military equipment |
| Cable: RG-316 (Mi-Label MIL-DTL-17) |
| Reason: Resistant to extreme temperatures, vibrations, and high shielding requirements. |
| 4. Supplementary instructions |
4.1 Outer diameter mismatch: MCX connectors usually support 1.0~3.0mm wire diameter, and customization is required beyond the range (such as micro wires require a dedicated MCX head). |
4.2 High frequency loss: RG-174 has 2 times higher loss than foamed PE wire at 6GHz, and is avoided for long-distance transmission. |
4.3 Phase stability: For phase-sensitive applications (phased arrays), prefer semi-rigid wires or phase-stabilized cables (e.g., Huber+Suhner S100). |
4.4 Connector Grade: Gold-plated contacts MCX (non-nickel plated) are selected to ensure a > of 500 mating and unmating life. |
Factory Tour
Adhering to the business principle of mutual benefits, we have had a reliable reputation among our customers because of our professional services, quality products and competitive prices.
Knowledge
What international certifications has your company obtained?
We hold the following certifications to ensure global compliance:
✅ Core Certifications:
ISO 9001: Quality Management System
ISO 14001: Environmental Management System
IATF 16949 (formerly TS 16949): Automotive Quality Management
How do you ensure product quality?
We implement ISO 9001-certified processes, 100% electrical testing, and strict IPQC inspections.
Do you provide technical support?
Yes. Our engineers offer installation guides, CAD drawings, and 24/7 email support.
What if products are damaged during shipping?
Notify us within 3 days of delivery with evidence. We’ll resend replacements or refund as per your choice.
What is your warranty policy?
We offer a 12-month warranty against manufacturing defects. Contact us with proof (photos/videos) for replacements/refunds.
How to test product quality before bulk orders?
We provide sample testing reports (VSWR, impedance, durability) and support third-party inspections (SGS, TÜV).
IPEX to SMA RF coaxial cable waterproof
Product Model：
Categories：
Keywords：
Download File：
MOQ:1000pcs
Online Message
Ready to grow your business? Your next great business opportunity starts with an inquiry.
Create the most competitive and outstanding enterprise in the industry and establish a national brand for China's intelligent manufacturing.
Contact Us
> Service Hotline
中企跨境-全域组件
制作前进入CSS配置样式
WhatsApp：
E-mail：
Message：
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Shenzhen Huanxie Technology Co..tld.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地