Product introduction
| Product introduction |
| BNC180° male head to SMB180° male head |
| Wire: RG174 RF coaxial cable |
| Interface type: BNC&SMB |
| Wire length: 5cm~200cm (length can be customized) |
| RG174 silver-plated cable parameter description | ||
| 1. Core parameters | ||
| Parameter | Typical value | Standard |
| Characteristic impedance | 50Ω ± 3Ω | RF standard impedance |
| Outside diameter | 2.8mm | The total diameter of the sheath |
| Central conductor | 7×0.16mm tin-plated copper stranded wire | Equivalent AWG26, good flexibility |
| Insulating materials | PVC or PE foam | Low-cost solution (high loss) |
| Shielding layer | Tinned copper braided layer (coverage rate ≥95%) | Single-layer weaving, basic shielding efficiency |
| Cover material | PVC | Flame retardant, flexible, limited temperature resistance |
| Minimum bending radius | 3 mm (static) / 6 mm (dynamic) | The signal delay is high. |
| 2. Frequency and attenuation | |||
| Frequency | Attenuation (dB/m) | Attenuation (dB/ft) | Application scenarios |
| 100MHz | 0.21dB/m | 0.064dB/ft | Available at low frequency |
| 500MHz | 0.48dB/m | 0.15dB/ft | 4G/LTE low frequency band |
| 1GHz | 0.68dB/m | 0.21dB/ft | Bluetooth/Wi-Fi 2.4GHz |
| 2.4GHz | 1.10dB/m | 0.34dB/ft | Wi-Fi/Internet of Things Critical Point |
| 3GHz | 1.25dB/m | 0.38dB/ft | The loss began to increase sharply. |
| 5GHz | 1.65dB/m | 0.50dB/ft | Wi-Fi 5 frequency band (use long lines carefully) |
| 6GHz | 1.82dB/m | 0.55dB/ft | Wi-Fi 6 frequency band (strongly not recommended) |
| 3. Electrical performance | |
| Parameter | Value |
| Electric capacity | 101 pF/m |
| Maximum working voltage | 1500 V RMS (25°C) |
| Average power capacity | 330W |
| Peak power capacity | 2.5KW |
| Zhu Boby | ≤1.5:1(DC-3GHz) |
| 4. Mechanical and environmental characteristics | |
| Parameter | Value |
| Minimum bending radius | 15mm (static)/30mm (dynamic) |
| Operating temperature range | -40℃~+80℃ (PVC sheath) |
| Tensile strength | ≥50N |
| Shielding efficiency | ≥70dB(1GHz) |
| Flame retardant level | UL1581/VW-1 |
| 5. Core advantages |
| The lowest cost: the price is about 60% of RG316 and 40% of the foam line |
| Extreme flexibility: bending flexibility is better than thicker cables (such as RG58) |
| Wide compatibility: outer diameter 2.8mm adapts to standard MCX/SMA/MMCX pressure joint |
| Selection guide | |||||
| 1. Commonly used adaptive cable specifications and characteristics | |||||
| Model | Outside diameter | Central conductor | 3GHz loss | Distinguishing feature | Applicable scenarios |
| RG-174 | 2.8mm | 7*0.16mm | 0.82dB/m | Flexible, easy to install, low cost | Consumer electronics |
| RG-316 | 2.6mm | 7*0.1mm | 0.84dB/m | High temperature resistance, military industry standards | High-temperature environment, test instruments |
| Micro-foam PE line | 1.5~2.2mm | 0.3~0.5mm | 0.50dB/m | Low high-frequency loss | 5G/Wi-Fi |
| Semi-steel wire | 1.0~3.0mm | Solid copper | 0.30dB/m | Relatively stable and well shielded | Test calibration, millimeter wave front band |
| 2. Key parameter comparison and selection logic | ||||
| 2.1 Priority of electrical performance | ||||
| Parameter | RG-174 | RG-316 | Foamed PE line | Affect |
| Attenuation @6GHz | 1.8dBm/m | 1.7dBm/m | 0.9dBm/m | High-frequency signal integrity |
| Shielding efficiency | 70dB | 90dB | >90dB | Anti-interference ability |
| Impedance stability | ±3Ω | ±2Ω | ±1Ω | Reflection signal suppression |
| 2.2 Mechanical and environmental adaptability | |||
| Parameter | RG-174 | RG-316 | Foamed PE line |
| Minimum bending radius | 15mm | 25mm | 30mm |
| Temperature tolerance range | -40℃~+85℃ | -65℃~+200℃ | -50℃~+85℃ |
| Tensile strength | Medium | Tall | Low (easy to damage) |
| 3. Typical application scenarios and cable matching |
| 3.1 Consumer electronic products (Bluetooth/Wi-Fi) |
| Cable: RG-174 |
| Reason: cost-sensitive, frequency ≤5GHz, short length (<0.3m) and controllable loss. |
| 3.2 Test instrument jumper (vector network analyzer) |
| Cable: RG-316 or low-loss foam cable (such as Times LMR-200) |
| Reason: It needs to be resistant to plugging and low loss (high calibration accuracy requirements). |
| 3.3 On-board radar/5G small base station |
| Cable: PTFE insulated foam cable (such as Gore G-FLEX 150) |
| Reason: 6~24GHz low loss demand, outer diameter ≤2mm convenient for wiring. |
| 3.4 Military equipment |
| Cable: RG-316 (military standard MIL-DTL-17) |
| Reason: Resistant to extreme temperature and vibration, high shielding requirements. |
| 4. Supplementary explanation |
| 4.1 Outer diameter mismatch: MCX connectors usually support 1.0~3.0mm wire diameters, and need to be customized beyond the range (such as micro wires, special MCX heads are required). |
| 4.2 High-frequency loss: RG-174 is twice as high as foam PE wire at 6GHz, and long-distance transmission avoids use. |
| 4.3 Phase stability: For phase-sensitive applications (phased arrays), semi-rigid lines or phase-stable cables (such as Huber+Suhner S100) are preferred. |
| 4.4 Connector level: Gold-plated contact MCX (non-nickel-plated) is selected to ensure a life of >500 plugging and unplugging. |
Factory Tour
Adhering to the business principle of mutual benefits, we have had a reliable reputation among our customers because of our professional services, quality products and competitive prices.
Knowledge
What international certifications has your company obtained?
How do you ensure product quality?
Do you provide technical support?
What if products are damaged during shipping?
What is your warranty policy?
How to test product quality before bulk orders?
BNC180° male head to SMB180° male head
Product Model:
Categories:
Keywords:
Download File:
MOQ:1000pcs
Online Message
Ready to grow your business? Your next great business opportunity starts with an inquiry.