Product introduction
product presentation
BNC180° male to BNC180° male wire: RG223 RF coaxial cable
interface type :BNC
Wire length: 5cm ~ 200cm (length can be customized)
RG223 RF coaxial cable parameters description
1. Core Parameters
parameter | representative value | standard |
characteristic impedance | 50Ω ± 2Ω | Complies with IEEE standards |
external diameter | 5.4mm ±0.2mm | Bending radius: dynamic 54 mm/ static 27 mm |
center conductor |
7 × 0.17mm tinned copper stranded wire | The cross- sectional area is 0.22m ㎡ , taking into account flexib- ility and con- ductiv ity |
insulation material | Solid polyeth- ylene PE | Dielectric con- stant 2.3 |
shielding layer | bilayer struct- ure : ① Tin-coated copper brai- ded layer (co- verage 96%) ② Tin-coated copper brai- ded layer (co- |
Double 95% woven shield- ing>85dB @1 GHz |
| verage 95%) |
|
Sheath material | inflaming ret- arding PVC | Oil resistant / wear resistant |
weight | 48KG/km | Lightweight design |
2. Frequency and Attenuation
frequency | damping (dB/100m) | Compare the advantages of RG58 | Maximum transmission distance |
100MHz | 10.5 | That's 18 per- cent lower | 150m |
400MHz | 21.8 | Low 22% | 70m |
1GHz | 36.2 | That's 25 per- cent lower | 35m |
2.4GHz | 59.7 | That's 30 per- cent lower | 20m |
3. Behaviour of Electricity
parameter | price |
propagation velocity | 66% the speed of light (VP =0.66) |
electric capacity | 101pF/m |
working voltage | 1500V RMS ( sea level ) |
VSWR | ≤ 1.3@3GHz |
4. Mechanical and Environmental Characteristics
test item | standard | bear fruit |
tensile strength | MIL-DTL- 23329 | ≥600 N |
flexible life | 1000 times @5 D bending ra- dius | Shield resista- nce change < 5% |
fire resistance | UL 1666 | Self-kill time <30 seconds |
temperature cycle | -40℃ ~ +85℃ 100 times | The decay flu- ctuation is < 3% |
Salt Spray Test |
500h/5% NaCl | The outer sh- eath is not co- rroded or per- forated |
5. Typical Application Scenarios
1. Military communications equipment
Field tactical radio jumper wire (resistant to pull/anti-sand)
Internal wiring in armored vehicles (passed MIL-STD-810 vibration test)
2. industrial control system
PLC is connected to the RF module (factory electromagnetic interference environment) and ship navigation equipment (salt spray corrosion resi- stant)
3. Test measuring instrument
Spectrum analyzer/network analyzer test line (double shielding is required to prevent interference)
EMI laboratory reference cable
Selection guidelines
1. Common Adapter Cable Specifications and Characteristics
model | external dia- meter | center condu- ctor | 3GHz loss | characteristic | applicable scene |
RG-174 | 2.8mm | 7*0.16mm | 0.82dB/m | Flexible, easy to inst- all, low cost | CE |
RG-316 | 2.6mm | 7*0.1mm | 0.84dB/m | High temperature resistance, military standard | High temperature environment, test instrument |
Microfoamed PE wire | 1.5~2.2mm | 0.3~0.5mm | 0.50dB/m | Low loss at high fr- equency | 5G/Wi-Fi |
Semi-wire | 1.0~3.0mm | Solid copper | 0.30dB/m | Relatively stable and shielded well | Test calibration, millimeter wave front end |
2. Key Parameter Comparison and Selection Logic
2.1 Electrical performance priority
parameter | RG-174 | RG-316 | Foamed PE line | influence |
damping @6GHz | 1.8dBm/m | 1.7dBm/m | 0.9dBm/m | High frequency signal integrity |
screening effectiveness | 70dB | 90dB | >90dB | capacity of resisting disturbance |
impedance stability | ±3Ω | ±2Ω | ± 1Ω | Reflection signal suppression |
2.2. Mechanical and environmental adaptability
parameter | RG-174 | RG-316 | Foamed PE line |
minimum bending radius | 15mm | 25mm | 30mm |
Temperature tolerance range | -40℃ ~ +85℃ | -65℃ ~ +200℃ | -50℃ ~ +85 ℃ |
tensile strength | secondary | tall | Low (easily damaged) |
3. Typical Application Scenarios and Cable Ma-
tching
3. 1 Consumer electronics (Bluetooth/Wi-Fi) cable: RG
-174
Reasons: cost sensitive, frequency ≤ 5GHz, short length ( <0.3m) and controllable loss.
3. 2 test instrument jumper (vector network analyzer)
Cable: RG-316 or low-loss foam cable (e.g. Times LMR-200)
Reason: It needs to be resistant to plug and pull, low loss (high calibration accuracy).
3.3. Car-mounted radar /5G small base station
Cables: PTFE insulated foam lines (e.g. Gore G- FLEX 150)
Reason: 6 ~ 24GHz low loss requirement, outer diameter ≤2 mm for wiring.
3.4 Military equipment
Cable: RG-316 (Military standard MIL-DTL-17)
Reason: Extreme temperature, vibration, high shielding requirements.
4.Supplementary Specification
4. 1. Outer diameter mismatch: MCX connector usually supports wire diameter of 1.0 ~ 3.0mm, and customization is required beyond the range (e.g., special MCX head is required for miniature wire).
4. 2 High frequency loss: The loss of RG-174 at 6 GHz is twice as high as that of foamed PE wire, so it should not be used for long distance transmis- sion.
4. 3-phase stability: Phase sensitive applications (phase array) are preferred semi-rigid lines or phase-stabilized cables (e.g. Huber+Suhner S 100).
4.4 connector class: Select gold plated contact MCX (non-nickel plated) to ensure a life of more than 500 pluggings and unplugs.
Factory Tour
Adhering to the business principle of mutual benefits, we have had a reliable reputation among our customers because of our professional services, quality products and competitive prices.
Knowledge
What international certifications has your company obtained?
How do you ensure product quality?
Do you provide technical support?
What if products are damaged during shipping?
What is your warranty policy?
How to test product quality before bulk orders?
BNC180° male head to BNC180° male head
Product Model:
Categories:
Keywords:
Download File:
MOQ:1000pcs
Online Message
Ready to grow your business? Your next great business opportunity starts with an inquiry.