Product introduction

Product introduction
BNC180° male head to BNC180° male head
Wire: RG223 RF Coaxial Cable
Interface type: BNC
Wire length: 5cm~200cm (length can be customized)
RG223 RF Coaxial Cable Parameter Description
1. Core parameters
ParameterTypical valueStandard
Characteristic impedance50Ω ± 2ΩComply with IEEE standards
Outside diameter5.4mm ±0.2mmBending radius: dynamic 54mm/static 27mm
Central conductor7×0.17mm tinned copper stranded wireThe cross-sectional area is 0.22mm2, taking into account flexibility and conductivity.
Insulating materialsSolid polyethylene PEDielectric constant 2.3
Shielding layer

Double-layer structure:

1 Tin-plated copper braided layer (coverage rate 96%)

2 Tinned copper braided layer (coverage rate 95%)

Double 95% braided shielding >85dB @1GHz
Cover materialFlame-retardant PVCOil-resistant/wear-resistant
Weight48KG/kmLightweight design
2. Frequency and attenuation
FrequencyAttenuation (dB/100m)

Compare the advantages 

of RG58

Extreme transmission distance
100MHz10.5                   Low 18%150m
400MHz21.8                   Low 22%70m
1GHz36.2                  Low 25%35m
2.4GHz59.7                  30% lower20m
3. Electrical performance
ParameterValue
Propagation speed66% light speed (VP=0.66)
Electric capacity101pF/m
Working voltage1500V RMS (sea level)
VSWR≤1.3@3GHz
4. Mechanical and environmental characteristics
Test itemsStandardBear fruit
Tensile strengthMIL-DTL-23329≥600 N
Bending fatigue life1000 times @5D bending radiusShielding resistance change <5%
Flame retardantUL 1666Self-extinguishing time <30 seconds
Temperature cycle-40℃~+85℃ 100次Attenuation fluctuation <3%
Salt spray test500h/5% NaClNo corrosion perforation of the outer sheath
5. Typical application scenarios
1. Military communication equipment
Field tactical radio jumper (anti-pull/anti-silt)
Internal wiring of armored vehicles (passed the MIL-STD-810 vibration test)
2. Industrial control system
PLC and RF module connection (factory electromagnetic interference environment)
Ship navigation equipment (resistant to salt fog corrosion)
3. Test and measuring instruments
Spectrum meter/network analyzer test line (requires double shielding to prevent interference)
EMI laboratory benchmark cable
Selection guide
1. Commonly used adaptive cable specifications and characteristics
ModelOutside diameterCentral conductor3GHz lossDistinguishing featureApplicable scenarios
RG-1742.8mm7*0.16mm0.82dB/m

Flexible, easy to 

install, low cost

Consumer electronics
RG-3162.6mm7*0.1mm0.84dB/m

High temperature 

resistance, military 

industry standards

High-temperature 

environment, 

test instruments

Micro-foam PE line1.5~2.2mm0.3~0.5mm0.50dB/m

Low high-frequency

 loss

5G/Wi-Fi
Semi-steel wire1.0~3.0mmSolid copper0.30dB/m

Relatively stable and

 well shielded

Test calibration, 

millimeter wave front band

2. Key parameter comparison and selection logic
2.1 Priority of electrical performance
ParameterRG-174RG-316Foamed PE lineAffect
Attenuation @6GHz1.8dBm/m1.7dBm/m0.9dBm/mHigh-frequency signal integrity
Shielding efficiency70dB90dB>90dBAnti-interference ability
Impedance stability±3Ω±2Ω±1ΩReflection signal suppression
2.2 Mechanical and environmental adaptability
ParameterRG-174RG-316Foamed PE line
Minimum bending radius15mm25mm30mm
Temperature tolerance range-40℃~+85℃-65℃~+200℃-50℃~+85℃
Tensile strengthMediumTallLow (easy to damage)
3. Typical application scenarios and cable matching
3.1 Consumer electronic products (Bluetooth/Wi-Fi)
Cable: RG-174
Reason: cost-sensitive, frequency ≤5GHz, short length (<0.3m) and controllable loss.
3.2 Test instrument jumper (vector network analyzer)
Cable: RG-316 or low-loss foam cable (such as Times LMR-200)
Reason: It needs to be resistant to plugging and low loss (high calibration accuracy requirements).
3.3 On-board radar/5G small base station
Cable: PTFE insulated foam cable (such as Gore G-FLEX 150)
Reason: 6~24GHz low loss demand, outer diameter ≤2mm convenient for wiring.
3.4 Military equipment
Cable: RG-316 (military standard MIL-DTL-17)
Reason: Resistant to extreme temperature and vibration, high shielding requirements.
4. Supplementary explanation
4.1 Outer diameter mismatch: MCX connectors usually support 1.0~3.0mm wire diameters, and need to be customized beyond the range (such as micro wires, special MCX heads are required).
4.2 High-frequency loss: RG-174 is twice as high as foam PE wire at 6GHz, and long-distance transmission avoids use.
4.3 Phase stability: For phase-sensitive applications (phased arrays), semi-rigid lines or phase-stable cables (such as Huber+Suhner S100) are preferred.
4.4 Connector level: Gold-plated contact MCX (non-nickel-plated) is selected to ensure a life of >500 plugging and unplugging.

Factory Tour

Adhering to the business principle of mutual benefits, we have had a reliable reputation among our customers because of our professional services, quality products and competitive prices.

Panoramic view of automatic assembly machine
Automatic cutting machine
展览设计框架
字体说明
纸杯设计

Solution

We welcome customers at home and abroad to visit our factory to reach long-term cooperation and create success together.

弘扬伟大精神 激发奋斗热情

弘扬伟大精神 激发奋斗热情

关于评选表彰第九届全国道德模范的通知

关于评选表彰第九届全国道德模范的通知

强化现代化建设的人才支撑

强化现代化建设的人才支撑

深入学习贯彻习近平文化思想

深入学习贯彻习近平文化思想

加快构建现代化产业体系(学思想 强党性 重实践 建新功)

加快构建现代化产业体系(学思想 强党性 重实践 建新功)

启动第九届全国道德模范评选表彰活动

启动第九届全国道德模范评选表彰活动

Knowledge

What international certifications has your company obtained?


We hold the following certifications to ensure global compliance: ✅ Core Certifications: ISO 9001: Quality Management System ISO 14001: Environmental Management System IATF 16949 (formerly TS 16949): Automotive Quality Management

How do you ensure product quality?


We implement ISO 9001-certified processes, 100% electrical testing, and strict IPQC inspections.

Do you provide technical support?


Yes. Our engineers offer installation guides, CAD drawings, and 24/7 email support.

What if products are damaged during shipping?


Notify us within 3 days of delivery with evidence. We’ll resend replacements or refund as per your choice.

What is your warranty policy?


We offer a 12-month warranty against manufacturing defects. Contact us with proof (photos/videos) for replacements/refunds.

How to test product quality before bulk orders?


We provide sample testing reports (VSWR, impedance, durability) and support third-party inspections (SGS, TÜV).

BNC180° male head to BNC180° male head

Product Model:

Categories:

Keywords:

Download File:

MOQ:1000pcs


Online Message

Ready to grow your business? Your next great business opportunity starts with an inquiry.


Send Inquiry Now

Online Message

submit to